TT系列陶瓷過濾板簡介 

TT series ceramic filter plate introduction

概述：Overview: 陶瓷過濾板為陶瓷真空過濾機的核心部件，其作為陶瓷過濾 機的過濾介質是20世紀以來的一次革命性突破，對傳統過濾 機有較強的替代性。 TT系列陶瓷板產品分為白剛玉、棕剛玉二大類。產品骨架原 料采用Al2O3，添加部分無機粘結劑和成孔劑，采用500T干 壓成型經精密加工后，采用好的工藝噴涂具有微米孔徑的氧 化鋁膜面，經1500～1800℃二次燒結成具有雙面過濾層的 耐壓可達8bard的多孔陶瓷板。 

Ceramic filter plates are the core components of ceramic vacuum filters. As the filtering  medium for ceramic filters, they have been a revolutionary breakthrough since the 20th  century and have a strong substitutability for traditional filters. TT series ceramic plate products are divided into two categories: white corundum and brown corundum. The skeleton material of the product is Al2O3, with some inorganic binders and  pore forming agents added. After adopting 500T dry pressure molding and precision  processing, advanced technology is used to spray the surface of aluminum oxide film with  micrometer pore diameter. After secondary sintering at 1500~1800 ℃, a porous ceramic  plate with a double sided filter layer and a pressure resistance of up to 8 barg is formed.

工作原理：working principle:

由于這種多孔材料含有無數其微小的毛細管，能夠產生毛細作用。在過濾過程中由于其毛細管力作用，在整個過程中只有水能通過濾板，而空氣始終不能通過，從而完成過濾任務，真空度可達到-0.097Mpa以上。對真空泵抽氣量要求比較低。 Because this porous material contains countless extremely small capillaries, it can produce capillary action. During the filtration process, due to its capillary force, only water can pass through the filter plate during the entire process, while air cannot pass through all the time, thus completing the filtration task. The vacuum degree can reach above -0.097Mpa. Extremely low requirements for vacuum pump pumping capacity.

TT系列陶瓷過濾板特點：  

TT series ceramic filter plate Features:

1、骨架密度大，膜層強度高，耐壓耐腐蝕，不容易損壞。

2、成孔率高，產能大；過濾精度高，真空能耗低；材質精細，可塑性強，現已研發使用膠粘復合板和整體壓制一體板兩種工藝。

3、再生方法多，可使用高溫高壓，有機溶劑等清洗，再生效果好，使用壽命大大延長。

1, the skeleton density is large, the film layer strength is high, pressure resistance and corrosion resistance, not easy to damage.

2, high porosity, large production capacity; High filtration accuracy, low vacuum energy consumption; Fine material, strong plasticity, has been developed and used adhesive composite board and integral compression of one board two processes.

3. There are many regeneration methods, which can be cleaned using high temperature and high pressure, organic solvents, etc., with good regeneration effect and greatly extended service life.

TT系列陶瓷過濾板結構 

TT series ceramic filter plate structure

陶瓷過濾板結構及工作原理圖

Structure and working principle diagram of ceramic filter plate

粘接板內部結構圖

Internal structure diagram of adhesive plate

一體板基板圖

Drawing of integrated board base plate

TT系列陶瓷過濾板技術參數表 

TT series ceramic filter plate technical parameter table